Is your flat roof collecting water? That shouldn’t be the case. If so, your property might experience issues down the line. While water accumulating for 1 day after a storm is normal, anything past 2 days is cause for investigation. 

If your flat roof is currently collecting water, you might be experiencing water retention problems. Pooling water on your roof can lead to potential collapse, faster deterioration of the e roof, and leaks. This is particularly true if the water is pooling on the roof for more than 2 days.  

So, why do flat roofs collect water? Today, we’re going to share with you some of the most common reasons. If you’re experiencing the same problem, make sure you hire an Orlando roofing company for help. 

Clogged Downspouts and Gutters 

One of the most ignored reasons for standing water is clogged spouts and gutters. Flat roofs need a proper drainage system to eliminate water. Thus, water can’t pass through if the system is clogged. It will simply pool on top of the roof.  

Your downspouts and gutters will not offer enough water runoff if they become clogged quickly due to the wrong installation. Make sure you hire a professional to help you create a design of the system to guarantee effectiveness.  

Saturated Insulation 

You might be making the problem worse if you enable debris to pile up on the roof. With heavyweight or foot traffic on a roof, you can damage the insulation and cause weak spots in the structure.  

Aside from that, energy bills can also increase since the roof is allowing more heat to leak in and out.  

Aside from your utility bills, saturated insulation can warp your roof’s structure. Because of this, water can pool in these uneven areas.  

Type and Age of Roofing Materials 

Flat roofs are often repaired or resurfaced with new materials. A lot of flat roofs have several layers of gravel, tar, and rubber. Unfortunately, the fixed layers aren’t always totally level with the others. Because of this, this can lead to issues in the flat roofs and establish areas for water accumulation. 

In addition to that, these issues can shorten your roof’s lifespan. While most roofs need repairs and replacements across their lifetimes, low-quality workmanship can shorten their lifespan. 

Wrong Design or Installation 

A huge number of causes for pooling water on flat roofs result from bad design. Amateur roofers could create a plan that doesn’t fit your house. Since issues aren’t always noticeable from the outside of the property, these errors could go unnoticed for several months.  

One common misunderstanding about flat roofs is that they’re quite easy to install or fix. However, that is not the case at all. Ignoring minor issues can cause structural problems for your roof down the line.  

Over time, these small issues can become worse. They can also enable more water accumulation.  

Because of this, it is always important to hire a professional roofing company when it comes to fixing flat roofs. Though they might cost a bit expensive, they can guarantee you won’t encounter any problems in the future.